Electronic Ballast
Introduction
Electronic Ballasts are making significant contributions to the energy efficiency of lighting systems because of their ability to operate the lamp at high frequencies. Low energy consumption has a good effect not only on the lighting systems economically but also for the environment. Ara Electronic Ballasts are the customer’s preferred choice to have everlasting lighting systems in houses, shops, offices, and industries.
Features
– Very high energy efficiency and low power loss
– Low weight, cost, and power consumption compared with conventional ballasts
– Soft start and flicker free
– Excellent electrical characteristics in order to extend lamp life
– Providing the best light quality thanks to the flickering free operation
– Making the lowest audible noise
– Pleasant light without stroboscopic effect
– Low self-heating due to minimal power loss
– No radiated electromagnetic interference
| Prameter | 201040 | 201080 |
|---|---|---|
| Lamp wattage (W) | 1 × 36/40 | 2 × 36/40 |
| Lamp type | FLU/PLL | FLU/PLL |
| Casing | 280 | 520 |
| Max. lamp current (A) | ||
| Switching Off/On Voltage (V) | ||
| Ignition Voltage (kV) | ||
| Pulses per cycle | ||
| Load capacitance (PF) | ||
| Internal loses (W) | ||
| Inherent temp. (℃) | ||
| Quantity per box (pcs) plastic | 100 | 100 |
| Quantity per box (pcs) aluminum |
| IEC 61347-2-1 | Particular requirements for starting devices (other than glow starters) |
| IEC 60927 | Auxiliaries for lamps- Starting devices (other than glow starters)- Performance requirements |
